Data report
Logged in as: Mike Dewhirst, ABC Australia Pty Ltd
Always refresh your browser to see any changes: 2022-04-15 06:10:40 UTC
This report shows data used as input for categorisation plus generated information of possible interest to AICIS in the event of an audit.
Industrial chemical data |
|
Trade or chemical name: | Polymer in resin solution 51/70 BuAc |
CAS name: | 2-Propenoic acid, 2-methyl-, butyl ester, polymer with butyl 2-propenoate, ethenylbenzene, 2-hydroxyethyl 2-methyl-2-propenoate and 2-propenoic acid |
Portfolio ID: | NIC1005242 |
Division | ABC Australia Pty Ltd - Operations |
Access status | Default - all identifying information (name, CAS etc) visible |
Physical state | Liquid |
Origin | Imported |
Information availability | Introducer does know the CAS number and CAS name for the introduced chemical |
CAS number | 83200-58-2 |
AICIS listing | Searched for but not found |
CAS name | 2-Propenoic acid, 2-methyl-, butyl ester, polymer with butyl 2-propenoate, ethenylbenzene, 2-hydroxyethyl 2-methyl-2-propenoate and 2-propenoic acid |
IUPAC name | Not entered |
INCI name | Not entered |
Nano-material | No |
Nano-soluble | No |
Incidental nano-material | No |
UVCB substance | Not applicable |
UVCB substance description | Not applicable |
GM product | No |
Name of GM organism | Not applicable |
Biological chemical | No |
Biochemical | No |
Biocidal active | No |
Organotin | No |
UV filter | No |
Polyhalogenated organic | No |
Fully fluorinated carbons | No |
Highly branched organic | Not applicable |
Persistent | No |
Readily biodegradable | No |
Bioconcentration factor | Not entered |
Bioaccumulation factor | Not entered |
Octanol/Water partition ratio | Not entered |
Aqueous solubility | Not entered |
CIH company | Not entered |
Information holder | Adrian Thomas
adrian@chemicalia.com ABC Australia Pty Ltd 1234567 Elsewhere Qld 4444 Australia |
International assessment | Not entered |
International health assessment | No |
Permission to use entire health assessment report | Not applicable |
International environment assessment | No |
Permission to use entire environment assessment report | Not applicable |
Rotterdam-Stockholm-Minamata | Not detected |
Formula | (C₈H₁₄O₂.C₈H₈.C₇H₁₂O₂.C₆H₁₀O₃.C₃H₄O₂)x |
2D structure | |
Chemical structure |
|
Molecular weight | Not entered |
EC No | Not entered |
ChemSpider ID | Not entered |
Standard InChIKey | InChIKey=HUBJMRJPDNEVEL-UHFFFAOYSA-N (commonchemistry.cas.org) |
Standard InChI | InChI=1S/C8H14O2.C8H8.C7H12O2.C6H10O3.C3H4O2/c1-4-5-6-10-8(9)7(2)3;1-2-8-6-4-3-5-7-8;1-3-5-6-9-7(8)4-2;1-5(2)6(8)9-4-3-7;1-2-3(4)5/h2,4-6H2,1,3H3;2-7H,1H2;4H,2-3,5-6H2,1H3;7H,1,3-4H2,2H3;2H,1H2,(H,4,5) (commonchemistry.cas.org) |
SMILES structure | O=C(O)C=C.O=C(OCCCC)C=C.O=C(OCCO)C(=C)C.O=C(OCCCC)C(=C)C.C=CC=1C=CC=CC1 (commonchemistry.cas.org) |
Polymer data |
|
Number average molecular weight | 2,110 g/mol |
Weight average molecular weight | 7,944 g/mol |
Dispersity | 3.76 |
Percentage medium molecules | 12% (< 1000g/mol) |
Percentage light molecules | 4% (< 500g/mol) |
Two elements | Yes |
Other elements | Yes |
Limited combination | No |
Difluoromethylene/Trifluoromethylene | No |
Prescribed reactants | No |
PLC info required for AICIS: Analysis data and prescribed reactants for polyesters | 06 November 2021
Records to prove one of the following:
• the number average molecular weight (NAMW) of the polymer is ≥ 10,000 g/mol and the polymer has:
▫ < 2% (by mass) of molecules with molecular weight < 500 g/mol; AND ▫ < 5% (by mass) of molecules with molecular weight < 1,000 g/mol.
AICIS will accept a GPC analysis report.
• the NAMW of the polymer is ≥ 1,000 g/mol and < 10,000 g/mol and the polymer has:
▫ < 10% (by mass) of molecules with molecular weight < 500 g/mol; AND ▫ < 25% (by mass) of molecules with molecular weight < 1,000 g/mol; AND ▫ a functional group equivalent weight (FGEW) of ≥ 5,000 g/mol if the polymer includes high-concern reactive functional groups, or an FGEW of ≥ 1,000 g/mol if the polymer includes moderate-concern reactive functional groups.
AICIS will accept a GPC analysis report and associated calculations.
• the polymer is a polyester manufactured solely from prescribed reactants. AICIS will accept chemical identity information on the polymer constituents |
Moderate concern reactive groups | No |
High concern reactive groups | No |
Reactive functional groups weight | Not entered |
Cationic density | Not cationic or potentially cationic |
PLC info required for AICIS: Low cationic density criteria | 06 November 2021
Records to prove the polymer has a low cationic density. You’ll need to prove one of the following:
• the polymer is not a cationic polymer or is not likely to become a cationic polymer in a natural aquatic environment (4 < pH < 9), if applicable. AICIS will accept chemical identity information on the polymer constituents and a representative structural formula of the polymer.
• the combined (total) FGEW of cationic groups is at least 5000 g/mol. AICIS will accept a GPC analysis report and associated calculations.
• the polymer is not soluble (< 0.0001 g/L) or dispersible in water and will only be used in solid phase (for example, ion exchange beads). AICIS will accept a study report and information on how the polymer will be used
OECD Test 105: Water Solubility OECD Test 120: Solution/Extraction Behaviour of Polymers in Water |
Polymer that is not stable | No |
Environment info required for AICIS: 11 Polymer that is not stable | 06 November 2021
Information that demonstrates that the polymer is protected from degradation by being encapsulated during use, or
information that demonstrates that all of the following applies to the polymer: - it is not designed to be pyrolysed or burnt, and - it is not designed or reasonably anticipated to substantially photodegrade, and - it is not designed or reasonably anticipated to substantially biodegrade, and - it is not explosive, and - it is hydrolytically stable (T½ greater than or equal to 12 hours), and - it is not a biological polymer, and - it is not a polysaccharide, and
if it is a polymer that contains polyethylene glycol (PEG) functionalities and has a solubility in water of greater than 200 mg/L - measured data demonstrates that the polymer does not substantially biodegrade, and
if it is a polymer that contains polypropylene glycol (PPG) functionalities and has a solubility in water of greater than 200 mg/L - measured data demonstrates that the polymer does not substantially biodegrade
OECD Test 118: Determination of the Number-Average Molecular Weight and the Molecular Weight Distribution of Polymers using Gel Permeation Chromatography OECD Test 119: Determination of the Low Molecular Weight Content of a Polymer Using Gel Permeation Chromatography OECD Test 120: Solution/Extraction Behaviour of Polymers in Water |
Small particles | No |
Absorbs water | No |
1 Chemical volume |
|
Product name | Acrydomyl 51/70 (containing 70% m/m Butyl Acetate) |
End use scenario | Paint and coating products |
Or end use | Resin for use in surface coatings |
Maximum end use concentration | 70 % |
Child or food contact | Neither |
Aerosolised during end use | No |
Any consumer end use | No |
No of items | Not entered |
Item unit weight | Not entered |
Product volume | 12,000 kg |
Precise proportion | 70% m/m Polymer in resin solution 51/70 BuAc |
Chemical volume | 8,400 kg |
Introduction |
|
Report ID | Not entered |
Exclusion | Not applicable |
Specified class | Not applicable |
Circumstances | Introduction of a polymer of low concern |
Introduction | Exempted - very low risk |
Total introduced | 8,400.0 kg |
Maximum concentration | 70 % |
Software revision | 0.9.60 |
No hazards |
|
8 Synonyms |
|
.. aka .. | 2-Propenoic acid, 2-methyl-, 2-hydroxyethyl ester, polymer with butyl 2-methyl-2-propenoate, butyl 2-propenoate, ethenylbenzene and 2-propenoic acid |
.. aka .. | 2-Propenoic acid, 2-methyl-, butyl ester, polymer with butyl 2-propenoate, ethenylbenzene, 2-hydroxyethyl 2-methyl-2-propenoate and 2-propenoic acid |
.. aka .. | 2-Propenoic acid, butyl ester, polymer with butyl 2-methyl-2-propenoate, ethenylbenzene, 2-hydroxyethyl 2-methyl-2-propenoate and 2-propenoic acid |
.. aka .. | 2-Propenoic acid, polymer with butyl 2-methyl-2-propenoate, butyl 2-propenoate, ethenylbenzene and 2-hydroxyethyl 2-methyl-2-propenoate |
.. aka .. | Acrylic acid-butyl acrylate-butyl methacrylate-2-hydroxyethyl methacrylate-styrene copolymer |
.. aka .. | Acrylic acid-butyl acrylate-butyl methacrylate-hydroxyethyl methacrylate-styrene copolymer |
.. aka .. | Acrylic acid-styrene-butyl methacrylate-2-hydroxyethyl methacrylate-butyl acrylate copolymer |
.. aka .. | Benzene, ethenyl-, polymer with butyl 2-methyl-2-propenoate, butyl 2-propenoate, 2-hydroxyethyl 2-methyl-2-propenoate and 2-propenoic acid |
5 Useful links |
|
AICIS assessment | https://www.industrialchemicals.gov.au/chemical-information/search-assessments?assessmentcasnumber=83200-58-2 |
AICIS CAS Number search | https://www.industrialchemicals.gov.au/search-inventory?casnumber=83200-58-2 If the CAS number is found this link will lead to the Inventory terms of listing. Otherwise it is most likely not listed |
AICIS checklist - Introduction of a polymer of low concern | https://www.industrialchemicals.gov.au/sites/default/files/2021-03/Exempted%20checklist%20-%20Polymers%20of%20Low%20Concern%20%5B485%20KB%5D.pdf The pdf file in this link will either download or display depending on your browser preferences |
AICIS Google search | https://www.google.com/search?q=83200-58-2+site%3A.industrialchemicals.gov.au Google search of the AICIS website for existing documents containing this CAS number |
AICIS record keeping obligations - Introduction of a polymer of low concern | https://www.industrialchemicals.gov.au/business/reporting-and-record-keeping-obligations/record-keeping-obligations-exempted-introductions/record-keeping-exempted-introductions-polymers-low-concern-plc |
3 Notes |
|
PLC info required for AICIS: Approved elements and prohibited groups | 06 November 2021
Records to prove that the polymer:
• contains approved elements only; AND • does not contain any difluoromethylene or trifluoromethyl groups.
AICIS will accept chemical identity information on the polymer constituents and a representative structural formula of the polymer |
PLC info required for AICIS: Constituents | 06 November 2021
Records to prove the chemical meets the AICIS definition of a polymer. AICIS will accept a GPC analysis report and information on the polymer constituents (including the weight percentage prior to polymerisation and any residual) |
Salt and/or ester parent hazards - Not applicable | 02 November 2021
2-Propenoic acid,
2-Propenoic acid CAS 79-10-7
H314 --> Causes severe skin burns and eye damage
H350 --> May cause cancer
H400 --> Very toxic to aquatic life
H332 --> Harmful if inhaled (gas, vapour, dust, mist) |
Click data entry to revise this information
Top